Motorola Mototrbo - 11.9 Torque Charts

11.9
Torque Charts
Table 38: Torque Specifications for Nuts and Screws on page 113 lists the various screws by
description and torque values in different units of measure. Torque all screws to the recommended
value when assembling the repeater.
Table 38: Torque Specifications for Nuts and Screws
Driver Type Torque
N-m (± 0.1) in-lb (± 1) kg-cm (± 1.2)
Torx T10 (Front Housing/Panel) 1.1 10 11.5
Torx T10 (Protective Covers) 1.3 12 13.8
Torx T10 (Power Inserts) 0.7 6.5 7.5
Torx T20 1.7 15 17.3
Torx T30 2.3 20 23.0
¾ Inch (19 mm) Hex Nut Driver 2.3 20 23.0
16 mm Hex Nut Driver 1.7 15 17.3
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
Send Feedback 113