LED Definition
Ethernet Link/Network Connectivity
Reference
Table 9: SLR 5000 Series Front Panel LED Definitions
LED Function Name LED Color LED State Status Indication
Power/Status Off Off Off
Green Flashing Operating Normally, with DC power
Solid Operating Normally, with AC power
Red Flashing Repeater is Disabled (by customer)
Solid Not Operational – Major Alarm
Amber Flashing
2
Check Alarm Log – Alarm occurred and cleared but
remains latched (configurable)
Solid Repeater Operational – Minor Alarm
Tx A Off Off Transmitter is not transmitting
Green Solid Tx slot A or Analog (at desired power)
Amber
2
Solid Tx slot A or Analog (at less than desired power)
Red
2
Solid Tx Fail
Flashing Tx Inhibit
Rx A Off Off No receive carrier detected
Green Solid Rx Slot A or Analog (qualifier met)
Amber
2
Solid Rx Slot A or Analog (non-qualified)
Tx B Off Off Transmitter is not transmitting
Green Solid Tx slot B or Analog (at desired power)
Amber
2
Solid Tx slot B or Analog (at less than desired power)
Red
2
Solid Tx Fail
Flashing Tx Inhibit
Rx B Off Off No receive carrier detected
Green Solid Rx Slot B or Analog (qualifier met)
Amber
2
Solid Rx Slot B or Analog (non-qualified)
Ethernet/Network Con-
nectivity
Off Off No Ethernet connection
Green Solid Connectivity/Linked
Flashing Attempting to connect to the system
Table continued…
2
Not supported in initial release.
Chapter 1: SLR 5000 Series Repeater
Motorola Solutions Confidential
42 Send Feedback
To Next Page
Loading...
