mru Optima 7 - Defining measurement window

USER MANUAL OPTIMA 7
MRU GmbH, D-74172 Neckarsulm 30 / 78
► Select the desired fuel parameter.
► Change the desired fuel parameter.
► Press OK.
 The defined user fuel appears in the menu Fuel type list.
 You can add the defined user fuel to the menu Fuel type selec-
tion.
 See also Chapter Adding fuels to fuel type selection, Page 27
Defining measurement window
► Start a measuring program.
In this example Program 1, Natural gas.
► Select one of three measurement windows.
► Press the Menu Key.
 A selection list appears.
► Select Define measuring window.
► Press OK
 The measurement window appears.
► Select the desired measured value that you want to change.
► Press the Menu Key.
 A selection list appears.
► Select Save measuring window.
► Press OK.
 The change is saved.