USER MANUAL OPTIMA 7
43 / 78 MRU GmbH, D-74172 Neckarsulm
Overwrite measured values in buffer
When the measurement is stopped, you can overwrite the displayed
measured values with the measured values stored in the temporary
buffer.
► Press F1.
The measurement is stopped.
The measured value window is highlighted in grey.
► Press the Menu Key.
A selection list appears.
► Select overwrite clipboard.
► Press OK.
Now you can change the current values and the values of the temporary
buffer with the key F3. This change of the actual values with the values
of the temporary buffer memory can be executed several times one af-
ter the other
Now it is possible to print and save as usual one of both measurements.
Storing measured values
If in the function key bar "store" is indicated, you can store with the ac-
companying function key F2 or F3 the measurement in the data
memory.
The function of the data memory is explained in chapter 8 Data Storage,
Page 48.
To Next Page
Loading...
