Operation of the System
SUPREMATouch
47
US
Status [Status of this cell]
Field type: Display
This field displays the status of the data cell used for data saving. If the status is “protected”, no
ranges can be defined or changed and the related following input fields are display fields.
Status text
Field type: text
Texts displayed in the measuring value lists can be entered here. This text will be displayed if the
measured value lies within the specified signal range.
Range
Field type: Number input
Lower and Upper limits of respective signal range. This signal range can be set in a range from 0
till 400. This is only a display field if the status for this sensing head is “protected”.
OK
Field type: Button
By tapping this button, the completed settings are applied for the selected sensing head.
Cancel
Field type: Button
By tapping this button, the settings are discarded for the selected sensing head.
To Next Page
Loading...
