SUPREMATouch
64
Operation of the System
MSA
US
End
Field type: Button
The presetting is finished by tapping this button.
Diagnostics Menu
Logbook
The logbook contains the following histories:
- Calibration [max. 4 calibration entries and pre-settings for each measuring point]
- System Events [max. 10,000 entries]
- Alarm Events [max. 50,000 entries]
- Signal Events [max. 50,000 entries]
- Configuration changes [max. 400 entries]
- Supply Voltage [max. 200 entries]
- Processor Temperature [max. 200 entries]
All history entries are time-stamped. When a history is full, the oldest entry is overwritten. The cal-
ibration history is an exception: Entries of the first calibration and pre-setting are not overwritten.
Selecting an item in the Logbook displays the corresponding history. History entries are shown as
list views. To scroll through the list content, just touch and slide. The scroll bar can also be used
to scroll vertically.
To Next Page
Loading...
