MTS Systems FlexTest SE Service Information

Model 493.02 Controller Service
Calibrating a Force Sensor
Calibration
132
Task 2 Turn on hydraulic pressure
Do not place any part of your body in the path of a moving actuator.
A crush zone exists between the actuator and any equipment in the
path of its movement. Immediate and unexpected actuator response is
possible when you apply hydraulic pressure to your system.
Stay clear of the actuators when applying hydraulic pressure.
See “Turn on hydraulic pressure” on page 108 for a detailed
procedure.
WARNING

MTS Systems FlexTest SE Specifications

General

Brand	MTS Systems
Model	FlexTest SE
Category	Controller
Language	English