multicomp MP7505 Series - Erase Waveforms from Memory; Save;Recall Instrument Settings; Preset Settings (Preset)

MP7505 Series User Manual
58
To copy the waveform file from the USB storage device to internal memory:
 After the waveform file in the USB storage device is called up according to the
previous step, press the Back softkey to return to the upper directory. After
returning to the memory selection interface, turn the rotary control to select
INTER and press the Arb file softkey. Turn the rotary control to select a USER file
and press the Save softkey to copy the waveform file to the internal memory.
Description: In the arbitrary waveform interface, Shape displays the storage
location or waveform name of the current arbitrary waveform. USER indicates
the internal memory, External indicates the USB storage device, and if it is a
built-in waveform, the built-in waveform name is displayed.
Erase waveforms from memory
To erase all waveforms from the instrument internal memory:
(1) Press the front panel Store function key to enter the file system.
(2) Select INTER under the memory selection interface, and then press the Arb file
softkey.
(3) Press the Secure softkey, the screen pops up, and then press the OK softkey to
erase all waveforms stored in internal memory.
Save/recall Instrument Settings
The instrument settings can be saved as files in internal memory. Up to 16 instrument
settings can be saved in the instrument internal memory. The saved settings can be
restored from files in the internal memory.
Operation Step:
Press the front panel Store function key to enter the file system.
 If you want to save the settings to the internal memory, select INTER and press
the Set File softkey. Turn the rotary control to select a Setup file and press the
Save softkey. (The file size is displayed on the right side of the Setup file. If 0B is
displayed, it means the file is empty.)
 Note: Press the Secure softkey, and then press the OK softkey to clear all the
settings in the internal memory.
 To recall a setup, select the desired setup, and press the CallOut softkey.
Preset Settings (Preset)
Sets the reset setting or power-on setting of the generator.