MP7505 Series User Manual
3. General Inspection
After you get a new generator, it is recommended that you should make a check on the
instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has
suffered serious damage, do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories as described in Appendix A: Accessories of this manual. You can
check whether there is any loss of accessories with reference to this description. If there
is any accessory lost or damaged, please get in touch with the distributor of MULTICOMP
PRO responsible for this service or the MULTICOMP PRO's local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the instrument
does not work normally, or fails in the performance test, please get in touch with the
MULTICOMP PRO's distributor responsible for this business or the MULTICOMP PRO's
local offices. If there is damage to the instrument caused by the transportation, please
keep all the packaging. With the transportation department or the MULTICOMP PRO's
distributor responsible for this business informed about it, a repairing or replacement of
the instrument will be arranged by the MULTICOMP PRO.
To Next Page
Loading...