MultiOne 2 Series User Manual

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
60/70
9.8 Engine maintenance
WARNING
SERVICE AND MAINTENANCE INSTRUCTIONS FOR THE ENGINE CAN BE FOUND IN THE ENGINE’S MANUAL SUPPLIED WITH THE
MACHINE.
9.8.1 Check engine oil level
To check the engine oil level proceed as follows:
1) Put the machine in “safety state” (see par. 9.2).
2) Wait until the engine has cooled down.
3) Open the engine cover (see par. 9.4).
4) Open the cap of the engine oil filler (FIG. 39 - Ref. 1)
5) Look for both the full and add oil lines (FIG. 39 - Ref. 3) of dipstick (FIG. 39 - Ref. 2). The correct oil level is between those two
lines.
6) If the refill is needed, add oil (FIG. 39 - Ref. 4). It is important to add the correct type of engine oil as stated in the engine manual.
7) Make sure to reinstall and secure the oil filler cap.
8) After filling the oil, wait a few minutes and check the oil level again
FIG. 39
1
2 3
4
9- MAINTENANCE

MultiOne 2 Series Specifications

General

Brand	MultiOne
Model	2 Series
Category	Compact Loader
Language	English