Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
8/70
2 MACHINE IDENTIFICATION
2.1 Copy of CE accordance statement
CE ACCORDANCE STATEMENT
Manufacturer
MULTIONE SRL SOCIETÀ UNIPERSONALE
via Palù, 6/8
36040 Grumolo Delle Abbadesse (VI) Italy
Tel. +39 0444 264600
info@multione-csf.com
Fax +39 0444 389260
www.multione.com
We declare that the machine is so identified
Designation Self-moving Compact wheel loader, articulated frame, equipped with multipurpose quick coupler, MULTIONE
Model
M1 2.3
Serial number
....................................
It is conform to the instructions of the following directives
2006/42/CE
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending
Directive 95/16/EC (recast).
2014/30/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of
the Member States relating to electromagnetic compatibility (recast).
2000/14/CE
Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws
of the Member States relating to the noise emission in the environment by equipment for use outdoors.
Notified organisation
VERICERT SRL - Certificazioni e Verifiche
Via S. Cavina n. 19 - 48100 Ravenna - Italy
NOTIFIED ORGANISATION N. 1878
Evaluation procedure
In-house control of the production with evaluation of the
technical documentation and recurrent controls.
Model M1 2.3
Guaranteed sound power level (L
WA
)
100 dB
Sound power level measured (L
WA
)
97 dB
Net installed power 19,8 kW @ 3600 rpm
Test engine rpm 3000 rpm
Main regulations harmonized among those applied
EN 12100-1-2:2003 / A1:2009 Safety of machinery. Basic concepts, general principles for design
EN 474-1:2006 / A1:2009 Earth-moving machinery - Safety - Part 1: General requirements
EN 474-3:2006 / A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders
Person authorized to keep updated the Technical Booklet
Name and roll
Carraro Giuseppe - Technical Manager
Person authorized to draw up the statement
Name and roll
Carraro Giuseppe - Technical Manager
Place
Grumolo delle Abbadesse (VI) Italy
Date
.........../.........../..........
Signature
2- MACHINE IDENTIFICATION