MultiOne 2 Series User Manual

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
4/70
1.3 Glossary
Term Definition
Basic machine
(later machine)
Self-moving Compact wheel loader, articulated frame, equipped with multipurpose quick coupler, planned
to carry out various functions using interchangeable attachments.
Original interchangeable
attachments(later attachment)
According to the article 2, b) of the Machine Directive 2006/42/CE it is a machine specified as: device
that after the starting up of a machine or of a tractor, is assembled with the machine or with the tractor
by the same authorized operator in order to modify the function or introduce a new function, to the
extent that this attachment is not a tool. Produced by the Manufacturer and commercialized by the
Manufacturer or by his authorized dealers (see par. 6.3).
Original option(later original)
Attachment produced by the Manufacturer and commercialized by the Manufacturer or his authorized
dealers (see par. 6.2).
Compatible attachment Attachment suitable to be assembled on a specific basic machine (see par. 6.3.1).
Assembly
Attachment assembly onto the basic machine, including the mechanic, hydraulic and electrical
(if required) connection.
Authorized dealer(later dealer)
He is a dealer authorized by the Manufacturer who the Customer must address to, for assistance and
emergency maintenance or for the purchase of attachments or original interchangeable attachments.
ROPS (Roll Over Protection
Structure)
Metal structure that protects the operator in charge seated at the driving seat in case of the machine
rolling.
FOPS (Falling Objects
Protective Structure)
Structure protecting the operator in charge sitting at the driving seat in case of falling objects.
Assembly factory Options assembly by the manufacturer before the machine delivery.
Assembly after market Options assembly later, after the machine purchase.
1.4 Abbreviations
ca. Circa about N. Number
Chap. Chapter Pag. Page
PPE Personal Protective Equipment Par. Paragraph
Right Right Pos. Position
eg. Example Ref. Reference
FIG. Figure/s Left Left
hrs Time TAB. Table
MAX. Maximum See See
MIN. Minimum Q.ty Quantity
min Minutes Etc. Etcetera
1- DOCUMENT IDENTIFICATION

MultiOne 2 Series Specifications

General

Brand	MultiOne
Model	2 Series
Category	Compact Loader
Language	English