MultiOne 2 Series User Manual

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
9/70
MultiOne SRL
2.2 Designation
The machine in question is so named:
Self-moving compact wheel loader, articulated frame, equipped
with multipurpose quick coupler, MULTIONE - 2 Series
N.B. The model of the machine is reported on the statement CE of conformity and on the marking CE applied to the machine.
3 IMPORTANT INFORMATION ABOUT SAFETY
3.1 General instructions
DANGER
IT IS COMPULSORY TO CONTROL CONSTANTLY THE PROPER FUNCTIONING OF ALL SHELTERS AND THE PROTECTION DEVICES
INSTALLED ON THE MACHINE.
IT IS COMPULSORY TO SUBSTITUTE AT THE RIGHT TIME POSSIBLE SHELTERS AND NOT WORKING WELL AND/OR DAMAGED
PROTECTION DEVICES.
DANGER
IT IS FORBIDDEN TO SUBSTITUTE ANY SHELTER, PROTECTION DEVICE OR ANY COMPONENT WITH NON ORIGINAL SUBSTITUTES.
IT IS FORBIDDEN TO TAMPER, EXCLUDE AND/OR TAKE AWAY ANY SHELTER OR PROTECTION DEVICE PLACED ON THE MACHINE.
PARTICULARLY THE ROPS STRUCTURE CANNOT IN ANY CASE BE DRILLED, WELDED OR MODIFIED, IN CASE OF DAMAGE IT
CANNOT BE REPAIRED BUT IT MUST BE SUBSTITUTED BY AN ORIGINAL SUBSTITUTE.
WHAT IS ABOVE IS VALID UNLESS THERE IS A DIFFERENT WRITTEN DISPOSITION BY THE MACHINE MANUFACTURER.
3.2 Residual risks
We inform the operator in charge that though the manufacturer has adopted all possible technical structural precautions to make
the machine sure, possible residual risks remain. They are described in succession.
DANGER
TO MINIMIZE THE EXPOSITION TO RESIDUAL RISKS IT IS COMPULSORY TO RESPECT THE SAFETY SIGNS
(SEE PAR. 4.7) AND WEAR THE INDIVIDUAL PROTECTION (SEE PAR. 4.9) REPORTED IN THIS MANUAL.
WARNING
THE RESIDUAL RISKS REPORTED IN SUCCESSION CONCERN THE MACHINE WITHOUT ASSEMBLED EQUIPPING. WE REFER TO
THE EQUIPPING INSTRUCTION MANUAL FOR THE DESCRIPTION OF THE RESIDUAL SPECIFIC EQUIPPING RISKS.
THERE IS THE RESIDUAL RISK OF INJURIES IN CONSEQUENCE OF FALL OF OBJECTS OR MATERIAL FROM THE POSSIBLE
ATTACHMENT ASSEMBLED TO THE MACHINE. CONSULT THE ASSEMBLED EQUIPPING INSTRUCTION MANUAL TO VERIFY THE
PRESENCE OF THIS RISK.
RESIDUAL RISK N. 1
THERE IS DANGER OF BURN FOR CONTACT IF THE AUTHORIZED OPERATOR GET INTO CONTACT WITH THE HOT PARTS SUCH
AS MULTICONNECTOR, HYDRAULIC CYLINDERS, HYDRAULIC PIPES, PARTS OF THE ENGINE THAT, OWING TO PROLONGED USE
OF THE MACHINE CAN REACH HIGH TEMPERATURES.
IT IS COMPULSORY TO RESPECT THE ASSEMBLY PROCEDURES, ATTACHMENT DISASSEMBLY (SEE CHAP. 8) AND ORDINARY
MAINTENANCE PROCEDURES (SEE CHAP. 9) DESCRIBED IN THIS MANUAL.
IMPORTANT INFORMATION ABOUT SAFETY -3

MultiOne 2 Series Specifications

General

Brand	MultiOne
Model	2 Series
Category	Compact Loader
Language	English