1
2
3
4
5
6
Communication Management
Managing the Communication History 6-11
Reading Journal Reports
For Fax Communication
Transmission Journal•
Example Print
Number Item Description
1 No. The job number
2 Destination The destination name or fax number
3 Mode The resolution used for the communication
4 Start Time The time the communication started
5 Time The time required from start to finish for the communication
6 Page The number of pages transmitted
7 Sender
(User name) :
GUEST :
ADMINISTER :
Only when a user is logged in
When transmission is performed without logging in
to the machine
When the machine performed transmission with a
function such as the archive transmission or scan path
notification function
8 Result
OK: Completed normally
*: ECM Mode transmission
#: Super G3 transmission
Code: The communication error code
*1
9 Note
The type of communication is printed for the following types of
communication: Nothing is printed for other types of communication.
• Manual Tx
• Polling Tx
• F-Code Tx
• Broadcast
• PC-Fax Tx
• PC-Fax F-code Tx
• Archive Tx
• Rerouted Fax Tx
10 Printed date
*2
The date and time that the journal report was printed
11 −
The date and time that the journal report was printed, or the date
and time that communication history started to be stored for a daily
communication report
When a communication error code is printed, confirm the content of the error and perform the *1
transmission again. For details, refer to Chapter 4, “Error Messages” in the Administrator’s Guide.
Only printed for a daily communication report.*2
To Next Page
Loading...
Need help?
General
