Muratec MFX-2550 - Specifying Default Settings; Specifying Default Scanner Settings

1
2
3
4
5
6
7
Device Settings
Specifying Default Settings 7-39
Specifying Default Settings
The default values are those used when you press <Reset> to return to the ready
screen. The machine returns to the default settings if is left without any operation for
a designated period of time. Changing the default values of often-used functions can
shorten the time required to adjust settings. Other settings are useful default settings.
Note
You can set the time it takes to return to the default settings. For details, refer to
Chapter 1, “Specifying Default Settings” in the Administrator’s Guide
Specifying Default Scanner Settings
You can change the default values and other settings for the scanner function. For
information on the items and settings that can be specified, refer to “List of Default
Scanner Settings” (see page 7-41) and “List of Other Settings” (see page 7-43).

Setting Example
Here the procedure for changing the default contrast is described as an example.
Press <Setting>.
1
Press [Default Settings].
2