1
2
3
4
Advanced Fax Functions
Security Functions 4-49
Press <Start>.
4
The following screen is displayed when the first and second numbers entered do not
match. Repeat the procedure in step 3. If the first destination you entered is wrong,
press <Reset> and repeat the procedure from step 2.
Security Reception
This function stores documents in memory without being printed. This function makes
it possible to store documents received at night in the memory, for example, when no
one is in the office. Since it is necessary to enter a passcode to print the documents, this
prevents received documents from being taken away. This section describes the procedure
for manually enabling the security reception function set in advance and printing the
received documents.
How to set up security reception, refer to “Security Reception” in the Administrator’s •
Guide.
When documents have been received during security reception, the message •
“Security Reception document exists.” is displayed and the information lamp
illuminates green.
Turning on
Security Reception in Real-time
You can manually enable security reception regardless of the set time.
Press <Fax>.
1
Press [Advanced].
2
To Next Page
Loading...
Need help?
General
