2-10 Advanced Scan Features
Press [Next Doc] or <Start>.
8
When the loaded documents have been scanned, the message “Set next document” is
displayed.
If you want to scan another document, repeat steps 7 to 8.
9
When you have finished scanning all the documents, press [Complete].
10
Duplex Scan
You can easily scan a two-sided document using this mode. Just load page one of the
duplex document in the ADF, and press <Start>. The machine will prompt you on the
following steps. The machine will automatically sort the pages into the correct order.
1
6
1
5
1
4
1
3
2
6
4
1 Scan the front side. 2 Turn over the document
and scan the backside.
3 The scanned data temporarily
saved in the memory will be
sorted and transmitted or saved.
5
5
1
3
2
2
4
4
6
6
5
1
1
To ADF
To ADF
Load the document in the ADF, and press <Scan>.
1
Press
2
[Advanced].
To Next Page
Loading...
Need help?
General
