Scanning to USB Memory
You can save a scanned document to USB memory connected to the machine.
Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.•
USB memory with a security function, memory card readers connected via USB, •
USB memory via an extension cable and USB hub, and USB memory that does not
meet the USB standards, are all unsupported.
If the USB memory becomes full while the data is being saved, the data that is •
being written is all deleted. Therefore, make sure that the USB memory has enough
free space in advance.
If you want to connect the USB memory via an extension cable, use a cable that is •
shorter than 3 meters.
Load the document, and press <Scan>.
1
For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s •
Guide.
Set the document type, contrast, and resolution as necessary. • (See page 1-20.)
Press the [PC/USB] tab, and then [USB].
2
To Next Page
Loading...
Need help?
General
