Entering the Destination Twice Before Transmission (Confirmation Dial)
When the confirmation dial function is set, a screen requiring you to reenter the
destination will be displayed before starting transmission. Transmission is allowed only
when the first and second numbers match. Entering the destination twice enables you
check whether there has been a mistake when entering the number. For details on setting
the confirmation dial function, refer to Chapter 2, “Confirming the Destination Before
Transmission” in the Administrator’s Guide.
When the destination includes a dialing option like pause (/P), you need to reenter it
exactly as entered previously including the dialing option.
Load the document, and press <Fax>.
1
Specify the destination.
2
For details on specifying the destination, refer to “• Specifying Destinations”. (See page 5-2.)
When specifying the destination with the numeric keys, press [Enter] after specifying the •
destination.
When the confirmation dial screen is displayed, reenter the destination you
3
entered in step 2.
To specify multiple destinations, repeat the operation in steps 2 and 3 until all the
destinations are entered twice. When specifying the destination with the numeric keys, press
[Enter] after specifying the destination.
To Next Page
Loading...
Need help?
General
