Muratec MFX-2550 - Scan Related Settings; Transmitting Only Part of the Document (Scan Size)

4-4 Scan Related Settings
Scan Related Settings
Transmitting Only Part of the Document (Scan Size)
You can transmit an image scanned using a scan size set in advance. This is useful when
you want to transmit a part of the document or want to specify the document size.
Note
When you scan using the document glass, only an area from the reference setting •
position equal to the set scan size is scanned.
When you scan using the ADF, only an area from the center with a width equal to •
the set scan size is scanned. The whole length of the document is scanned.
Document glass
Reference setting position
ADF
A…A4 / A5 / F4
A
Reference setting position
A…Legal / Letter / Half-letter
Half-letter Letter Legal
A
Reference
setting
position
Reference
setting
position
A5 A4 F4
Load the document, and press <Fax>.
1
Press [Advanced].
2