Muratec MFX-2550 - Scanning the Next Document (Next Document Setting)

4-6 Scan Related Settings
Scanning the Next Document (Next Document Setting)
You can scan a series of separate documents and transmit them as a single document.
For example, this enables you to scan an invoice using the ADF and a map using the
document glass, and send them together in a single transmission.
Note
The next document settings can be set separately for the ADF and the document glass.
Load the document, and press <Fax>.
1
Press [Advanced].
2
Press [Next Doc.].
3
Select [ON] and press [Enter].
4
If you select [OFF], the next document setting is disabled.
Press [Close].
5