1
2
3
4
Advanced Fax Functions
Scan Related Settings 4-7
Specify the destination, and press <Start>.
6
If you do not set the next document settings, this completes the procedure.•
For details on specifying the destination, refer to “• Specifying Destinations”. (See page 5-2.)
Load the next document to scan.
7
Set the resolution and contrast as necessary.
Press [Next Doc] or <Start>.
8
When the loaded documents have been scanned, the message “Set next document” is
displayed.
If you want to scan another document, repeat steps 7 to 8.
9
When you have finished scanning all the documents, press [Tx Start].
10
To Next Page
Loading...
Need help?
General
