2-40 Advanced Scan Features
Press [Close].
5
Specify the destination, and press <Start>.
6
For details on the procedure, refer to “Scanning to a User”. (See page 1-7.)
Using ScanTag
The ScanTag feature allows you to create image data and metadata (data indicating the
attributes and processing method of the image file) in a single scan. The image data and
metadata will be sent automatically to a network computer.
Set ScanTag before using this function. For details, refer to Chapter 3, “Setting
ScanTag” in the OfficeBridge Guide.
Entering a tag (metadata) at the machine
Load the document, and press <Scan>.
1
Press the [Apps] tab, and then [ScanTag].
2
Select the
3
ScanTag setting you wish to use.
To Next Page
Loading...
