3-14 Initial Setup (User Install)
Entering
Your Fax Number
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
Press [User Install].
3
Press [TTI Number].
4
Use the numeric key to enter the TTI number, and press [Enter]
5
.
This number can contain up to 20 characters.•
To enter “+” symbol before your country code, press [+].•
To make long numbers easier to read, press [-] to enter it.•
To erase a number, press [Clear].•
To change just one number, press [•
] or [
] to move the cursor then press [Clear] to erase
the number. Then re-enter the correct number.
To Next Page
Loading...
Need help?
General
