Configuring the Printer8-92
[Password] Select [Change Password] to change the
password.
If [EAP Type] is set to [EAP-MD5],
[EAP-TTLS], [PEAP] or [Server Specifica-
tion], specify the password.
Range: Up to 128 characters
Default: [Blank]
[TTLS Anonymous Name] Specify the logon name used with
EAP-TTLS primary authentication.
If [EAP Type] is set to [EAP-TTLS] or
[Server Specification], specify the TTLS
anonymous name.
Range: Up to 128 characters
Default: [anonymous]
" If [EAP Type] is set to [Server
Specification] while the actual
authentication method is
EAP-MD5, type in the same name
as that specified for [User ID].
[TTLS Authentication Type] Select the EAP-TTLS phase 2 authenti-
cation procedure.
If [EAP Type] is set to [EAP-TTLS] or
[Server Specification], select the TTLS
anonymous type.
Choices: [PAP], [MS-CHAP],
[MS-CHAPv2]
Default: [MS-CHAPv2]
[Send Client Certificate] Select whether or not the client certificate
is sent when the client certificate is
requested by the server. If [EAP Type] is
set to [EAP-TTLS], [PEAP] or [Server
Specification], select the setting to send
the client certificate.
Choices: [Enable], [Disable]
Default: [Disable]
Item Description
To Next Page
Loading...
Need help?
General
