Muratec MFX-C3035 - Appendix

Configuring the Printer 8-111
[Paper Source] The paper tray that is normally used can be speci-
fied.
Choices: [Tray1], [Tray2], [Tray3], [Tray4]
Default: [Tray2]
Configuration Menu Equivalent:
[Admin Settings] - [Copy Settings] - [Paper
Priority]
" [Tray3] and [Tray4] appear only if an optional
lower feeder unit is installed.
[Duplex] If [Long-Edge Binding] is selected, the pages will be
printed on both sides of the paper for long-edge
binding.
If [Short-Edge Binding] is selected, the pages will be
printed on both sides of the paper for short-edge
binding.
Choices: [Off], [Short-Edge Binding], [Long-Edge
Binding]
Default: [Off]
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Simplex/Duplex]
[Output Tray] Displays the name of the output tray.
[Copies] Specifies the default setting for number of copies to
be printed.
Range: 1-9999
Default: 1
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Copies]
[Paper Size] Specifies the default setting for the size of paper.
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Paper Tray Settings] - [Tray1] -
[Paper Size]
Item Description