Muratec MFX-C3035 - Technical specifications

Configuring the Printer8-112
[Width] Specifies the paper width when [Paper Size] is set to
[Custom Size].
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Paper Tray Settings] - [Tray1] -
[Custom Size] - [Width]
[Length] Specifies the paper length when [Paper Size] is set
to [Custom Size].
Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Paper Tray Settings] - [Tray1] -
[Custom Size] - [Length]
[Paper Type] Specifies the default setting for the type of paper.
Choices: [Plain Paper], [Recycled], [Thick 1], [Thick
2], [Label], [Envelope], [Postcard],
[Letterhead], [Glossy 1], [Glossy 2], [Single
Side Only], [Special Paper]
Default: [Plain Paper]
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Paper Tray Settings] - [Tray1] -
[Paper Type]
[Collate] If [On] is selected, all pages in a copy of the docu-
ment can be printed before printing the next copy.
If [Off] is selected, all copies of the document are not
printed separately.
Choices: [On], [Off]
Default: [Off]
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Paper Tray Settings] - [Paper
Setting] - [Collate]
Item Description