Before using VJ-1324 OPERATION MANUAL
100 3.6 Adjust Print
3.6.2.1 Custom Confirmation Pattern
From this menu, you can print all confirmation patterns A to F to check the amount of misalignment.
1. Turn ON the printer and load the roll media.
3.4.2 Setting Roll Media
2. Display the Adjust Print menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu1: Setup>" is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [+] key or [–] key to select "Set 1: User Type".
c. Press the [Enter] key on the operation panel.
• "User: TypeXX" (XX is a number between 1 and 30) is displayed on the operation panel.
To Next Page
Loading...
Need help?
General