Before using VJ-1324 OPERATION MANUAL
42 3.2 Turning the power ON/OFF
3.2 Turning the power ON/OFF
This section explains how to turn the printer ON/OFF.
3.2.1 Turning the power ON
Follow the procedure below to turn the power ON.
1. Press the [Power] key on the operation panel to turn ON the printer.
• Power lamp on the operation panel turns on (blue).
• The printer starts initial operation.
• When the initial operation is complete, the printer enters Normal.
NOTE
• If there is a problem during the initial operation, a message is displayed on the operation panel and
the printer may stop operating.
If operation stops, refer to "
7 Troubleshooting" and deal with the problem.
To Next Page
Loading...
Need help?
General