Panel setup menu VJ-1324 OPERATION MANUAL
180 5.1 Setup menu
5.1.8 Origin menu
Sets the beginning of printing (origin) of the print data.
Set the menu when reprinting on the margin with changing the printing data position to the printed
media.
NOTE
• When Output Mode menu is set to "Take-up", the set value X (media feeding distance) becomes 0
mm to 15000 mm.
5.1.6 Output Mode menu
• Depending on the set value of the side margin, the maximum set value of Y (print head transferring
distance) decreases.
5.1.3 Side Margin menu
To Next Page
Loading...
Need help?
General