VJ-1324 OPERATION MANUAL Maintenance
6.4 Moving or transporting the printer 243
(2) Reinstalling
After moving the printer, follow the procedure below to set it ready for use.
1. Select a suitable place for installation.
Installation manual
2. Move and install the printer to the location.
3. When using the stands, make sure that the stands and the wing bolts (2 pieces) retaining the printer
are not loose.
4. Attach cables, such as the power cable.
3.1 Power cable connection
3.7 Connecting the printer to PC
5. Perform Nozzle check, and then confirm that there is no clogging in the print head.
3.5.1 Nozzle check
6. Perform Alignment.
3.6 Adjust Print
6.4.2 Transporting the printer
When transporting the printer, make sure to pack it in the same condition as purchased, using protective
and packing materials to protect the printer from vibration and shocks.
NOTE
• When transporting the printer, consult the MUTOH product dealer at your point of purchase.
To Next Page
Loading...
Need help?
General