Panel setup menu VJ-1324 OPERATION MANUAL
158 5.1 Setup menu
5.1 Setup menu
Various settings of the printer are configured.
Setup item Description
User Type Sets the user type setting for printing.
• [Enter] key: shifts to the sub menu.
5.1.1 User Type menu
Spitting Sets up the spitting operation while printing.
• [Enter] key: shifts to the sub menu.
5.1.2 Spitting menu
Side Margin Specifies the right and left margins of printed media.
• [Enter] key: shifts to the sub menu.
5.1.3 Side Margin menu
Media Initial Sets whether to detect the media width and edge while initializing the media.
• [Enter] key: shifts to the sub menu.
5.1.4 Media Initial menu
Media Width Specifies the media width between the loading mark and the left end if media detection is not
performed during media initialization.
Displays the detected media width if media detection is performed during media initialization.
• [Enter] key: shifts to the sub menu.
5.1.5 Media Width menu
Output mode Sets the media ejection method after printing.
• [Enter] key: shifts to the sub menu.
5.1.6 Output Mode menu
Method of Cut Sets the media cutting method after printing.
• [Enter] key: shifts to the sub menu.
5.1.7 Method of Cut menu
Origin Sets the beginning of printing (origin) of the print data.
• [Enter] key: shifts to the sub menu.
5.1.8 Origin menu
Prev. Stick Sets up to prevent media from sticking when printing starts.
• [Enter] key: shifts to the sub menu.
5.1.9 Prev. Stick menu
StandbyHeating Sets the time to preheat the heater while the printer is n standby mode.
• [Enter] key: shifts to the sub menu.
5.1.10 StandbyHeating menu
Head Travel Sets up the range that the print head moves while printing.
• [Enter] key: shifts to the sub menu.
5.1.11 Head Travel menu
Multi Strike Sets up the overwrite count per line.
• [Enter] key: shifts to the sub menu.
5.1.12 Multi Strike menu
Strike Wait Sets up the waiting time while overwrite printing.
• [Enter] key: shifts to the sub menu.
5.1.13 Strike Wait menu
To Next Page
Loading...
Need help?
General