VJ-1324 OPERATION MANUAL Panel setup menu
5.1 Setup menu 159
Slant Check Sets up slanting detection during media loading.
• [Enter] key: shifts to the sub menu.
5.1.14 Slant Check menu
Auto Cleaning Sets up the time for auto cleaning during standby, before printing, and during printing.
• [Enter] key: shifts to the sub menu.
5.1.15 Auto Cleaning menu
Ink Status Displays the various information (ink status) about ink cartridges that are installed in the slots
and information about Smart/C.
• [Enter] key: shifts to the sub menu.
5.1.16 Ink Status menu
Roll Length Sets up the roll media length.
•[Enter] key: shifts to the sub menu.
5.1.17 Roll Length menu
Longstore Wash the print head with the cleaning fluid.
• [Enter] key: shifts to the sub menu.
5.1.18 Longstore menu
CR Maintenance Performs maintenance.
• [Enter] key: shifts to the sub menu.
5.1.19 CR Maintenance menu
Initialization Returns the settings of the printer to default.
• [Enter] key: shifts to the sub menu.
5.1.20 Initialization menu
Life Times Displays the operational life time of each part.
• [Enter] key: shifts to the sub menu.
5.1.21 Life Times menu
IP Address Sets the IP address of the printer.
• [Enter] key: shifts to the sub menu.
5.1.22 IP Address menu
Subnet Mask Sets the subnet mask of the printer.
• [Enter] key: shifts to the sub menu.
5.1.23 Subnet Mask menu
Gateway Sets the gateway.
• [Enter] key: shifts to the sub menu.
5.1.24 Gateway menu
Temporary Displays the settings of "Off" or "ALL Off" in the Selection menu in the Setup menu
temporarily.
• [Enter] key: returns to the previous menu with all set up items displayed.
• [Cancel] key: returns to the previous status in the Selection menu when the Setup menu is
displayed.
5.4 Menu Option menu
— • [Cancel] key: shifts to the previous menu.
5 Panel setup menu
Setup item Description
To Next Page
Loading...
Need help?
General