VJ-1324 OPERATION MANUAL Handling the printer
4.4 Operating from the operation panel 139
NOTE
• When loading the new roll media, cut the front edge of the media if it is not straight.
4.4.5 Changing and confirming settings while printing
While the printer is operating, you can change or confirm settings for the Panel setup menu.
4.4.5.1 Procedure for changing and confirming settings while printing
Follow the procedure below to change or confirm settings for the Panel setup menu.
1. Confirm that the printer is in one of the following conditions.
• Receiving data
• Analyzing data
• Printing
2. Press the [Menu] key on the operation panel.
• "Menu5: Temperature" is displayed on the operation panel.
3. Press the [+] key or [–] key to change or confirm settings.
NOTE
• For the setting items whose settings can be changed or confirmed, refer to "4.4.5.2 Settings that
can be changed or confirmed while printing
".
To Next Page
Loading...
Need help?
General