VJ-1324 OPERATION MANUAL Before using
3.6 Adjust Print 105
3.6.2.2 Custom Rough Adjustment Pattern
Check the confirmation pattern, and when the misalignment is big, perform rough adjustment.
Print a rough adjustment pattern and register the setting value.
1. Display the Custom Adjust Print menu on the operation panel in the same way as in step 2 of
"
3.6.2.1 Custom Confirmation Pattern"
2. Press the [+] key or [-] key to select "Adj.2: Rough Pattern".
3. Press the [Enter] key on the operation panel.
• "Warming Up", and then "Warming Up Skip -> E" are displayed.
NOTE
• To start printing during warming up, press the [Enter] key while "Warming Up Skip -> E" is
displayed.
4.4.7 Start Printing during Warm up
• A rough adjustment pattern for print quality adjustment is printed after warming up.
• The pattern images are printed on both paper edges and the center of the media.
• Six rough adjustment patterns will be printed. Input setting value for each pattern.
To Next Page
Loading...
Need help?
General