Product overview VJ-1324 OPERATION MANUAL
26 2.1 Features
2.1 Features
This section explains the main features of the printer.
(1) High-speed output
The new print head has realized high-speed output.
For VJ-1324, the printing width of 1,361mm has been made possible.
(2) Wide variety of compatible media
The height of the print head is adjustable to two levels, which has made it possible to print on various
paper with the width of 0.08mm to 1.3mm.
(3) Vibrant color reproduction
4 colors of ink are used for printing in order to reproduce sharp and vivid colors.
High capacity ink cartridges of 220ml with the dedicated IC chip (1000ml Inkpacks are also usable with
the dedicated adapter) are adapted.
Ink consumption amount can be controlled, greatly improving productivity.
Use of variable dots can also improve color reproduction.
(4) Adapted multi-heater
The media heating system developed by LamiLess series has been arranged for solvent ink.
Pre-heater, Platen heater, and After heater have been installed to improve ink settlement and drying speed
of solvent ink on media.
(5) Effective use of media
A JOG feature is provided to allow setting of the print starting position as required.
Printing can be performed on media that has already been printed on. This allows effective use of left
margins.
(6) Optional spectrophotometer is available
A compact and light spectrophotometer (SPECTROVUE VM-10) is provided to measure visible light
ranging from 400nm to 700nm. This can be used as a colorimeter for color calibration and profiling. (The
conditions of use for color calibration and profiling depend on your RIP software.)
Install spectrophotometer on the print head to measure the color target automatically.
To Next Page
Loading...
Need help?
General