Handling the printer VJ-1324 OPERATION MANUAL
142 4.4 Operating from the operation panel
4.4.7 Start Printing during Warm up
You can start printing even when the heater temperature has not reached the preset value while the
printer is being warmed up.
NOTE
• Even when printing is started during warm up, the printer continues to be warmed up until the preset
temperature has been reached.
• When printing is started during warm up, the print quality is not guaranteed.
1. Check if the printer is the printer is being warmed up.
• "Warming Up" is displayed on the operation panel.
2. Send the data.
• "Warming Up" "Skip -> E" is displayed on the operation panel.
3. When printing during warm up, press the [Enter] key on the operation panel.
• The printer starts printing.
To Next Page
Loading...
Need help?
General