VJ-1324 OPERATION MANUAL Panel setup menu
5.1 Setup menu 175
5.1.3 Side Margin menu
Set up the right and left margins (side margins) while printing.
NOTE
• When the spitting menu is set to "On Media", the maximum printable media width becomes 10mm
shorter.
Therefore, the side margin becomes "value set on side margin menu" +5mm.
5.1.2 Spitting menu
• Depending on the setting, the right margin is a sum of the following.
"Y (print head transferring distance) of the Origin menu" + "5mm (when the spitting setting is "On
Media")" + "value set on side margin menu"
1. Starting position
2. Media feed direction
X (media feeding distance)
Y (print head transferring distance)
a (0mm/5mm: The spitting setting is On, Off/On Media)
b (5mm to 25mm: Side margin setting amount)
5.1.2 Spitting menu
5.1.8 Origin menu
Setup item Setting Description
Side Margin <5mm> to 25mm Set the side margins.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Yab
0
2
X
1
To Next Page
Loading...
Need help?
General