VJ-1324 OPERATION MANUAL Panel setup menu
5.1 Setup menu 173
5.1.2.1 Spitting Pass count menu
Set the frequency (spitting return count) that the print head returns to the spitting box (located) on the
origin side when setting "On" or "On Media" in the Spitting menu.
NOTE
• If you set the flushing return count to a high number, the nozzle will become easily clogged when
printing for a long time because flushing is not performed over the flushing box.
Setup item Setting Description
Spitting <On> Perform the flushing operation on the spitting box located on
the origin side for every shuttle.
•[Enter] key: saves the setting and shifts to the sub menu.
5.1 Setup menu
On Media Perform the spitting operation on the page margins.
The printing speed will be improved since the number of time
to return to the spitting box is reduced.
•[Enter] key: saves the setting and shifts to the sub menu.
5.1.2.1 Spitting Pass count menu
Off Spitting operation is not performed.
•[Enter] key: saves the setting and shifts to the previous menu.
5.1 Setup menu
— •[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
ReturnCount <1 time> to 999 times Set the spitting return count.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.2 Spitting menu
To Next Page
Loading...
Need help?
General