Troubleshooting VJ-1324 OPERATION MANUAL
250 7.1 Malfunctions and failures
(4) Media jams frequently occur
NOTE
• If media other than the recommended one is used, correct media feeding cannot be assured.
(5) The media veers during printing
7.1.4 Printing-related troubleshooting
(1) Printing is partially stained or incomplete
NOTE
• Proper print quality may not be obtained with the media other than the recommended one.
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media
type
2 Is the media used in an environment other
than the one specified?
Use the media in a dedicated environment.
4.2.2 Cautions
on handling media
3 Are you using the old media? Replace it with new media.
6.1.2
Replacing Roll
Media
4 Are you using the folded or wrinkled media?
5 Does the media bend? Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
4.2.1 Media
type
5.1.1.1.8
Vacuum Fan menu
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media
type
2 Is the loading position of the media correct? Set the media correctly.
3.4 Loading
media
3 Is the scroller set correctly? Set the scroller correctly.
3.4.1 Loading
roll media
No. Possible cause Remedy Reference
1 Does the media include moisture? Replace it with new media.
6.1.2
Replacing Roll
Media
2 Are you using the folded or wrinkled media?
To Next Page
Loading...
Need help?
General