VJ-1324 OPERATION MANUAL Before using
3.6 Adjust Print 93
3.6.1.2 Standard Rough Adjustment Pattern
Check the confirmation pattern, and when the misalignment is big, perform rough adjustment.
Print a rough adjustment pattern and register the setting value.
1. Display the Adjust Print menu on the operation panel in the same way as in step 2 of
"
3.6.1.1 Standard Confirmation Pattern"
2. Press the [+] key or [-] key to select "Adj.2: Rough Pattern".
3. Press the [Enter] key on the operation panel.
• The printer starts printing a rough adjustment pattern.
• The pattern images are printed on both paper edges and the center of the media.
To Next Page
Loading...
Need help?
General