VJ-1324 OPERATION MANUAL Before using
3.6 Adjust Print 107
6. Press the [+] key or [–] key to enter the number that you selected in Step 4.
NOTE
• When you press the [Cancel] key, the input operation is not executed and "Adj.2: Rough Pattern"
is displayed on the operation panel.
7. Press the [Enter] key on the operation panel.
• The value is set in the "Pattern A: *" (* indicates a number from 1 to 11).
8. In the same way, enter the numbers for "Patterns B" to "Pattern F".
• Press the [Enter] key to set the values.
• Once all set values have been entered, press the [Enter] key to register the set values of "Pattern
A" to "Pattern F" to the printer.
• The operation panel display returns to "Adj.2: Rough Pattern".
To Next Page
Loading...
Need help?
General