Maintenance VJ-1324 OPERATION MANUAL
228 6.2 Cleaning the printer
• The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
• "Set1: User Type" is displayed on the operation panel.
c. Press the [+] key or [–] key to select "Set20: CR Maintenance".
d. Press the [Enter] key on the operation panel.
• "CR Mainte.: Start" is displayed on the operation panel.
• The display enters the CR Maintenance menu.
5.1.19 CR Maintenance menu
To Next Page
Loading...
Need help?
General