Before using VJ-1324 OPERATION MANUAL
46 3.3 Installing ink cartridges
NOTE
• Do not share the ink cartridge once installed with another printer. The cartridge will not be usable
from that time onward.
• Use genuine ink cartridges or ink packs for charging.
This printer is designed to use genuine ink cartridges or ink packs .
If you use ink cartridges or ink packs which are not produced by the original manufacturer,
• Printing might become blurred and the end of the ink in the cartridge or pack might not be detected
correctly.
• Any problems caused by using an ink cartridge or pack other than those recommended above will
not be covered by the warranty, and repair expenses will be paid by the customer.
• For types and details of ink cartridges and ink packs, contact your local MUTOH dealer.
• Do not give ink cartridges or ink packs strong shakes.
Doing so may cause ink leakage.
• Do not disassemble ink cartridges or ink packs .
A disassembled ink cartridge cannot be used.
• Make sure to use the dedicated cleaning fluid (Model number: VJ-MSINK3-CL220/VJ-MSINK3-
CL1000).
• Before installing the ink cartridges or ink packs, shake it gently.
Doing so will preserve print quality.
• When an ink cartridges or ink packs is moved from a cold place to warm place, keep the ink
cartridges or ink packs for three hours or more in the new printing environment before printing.
• Do not insert or remove the ink cartridges or ink packs more than 10 times.
If the ink cartridge has been removed/inserted more than 10 times, it cannot be used even though
ink remains.
• The ink cartridges and ink packs for this printer have dedicated IC chip on them.
If removing/inserting the ink cartridges or ink packs and high capacity pack adapters (option) in the
following situations, the information within the IC chips may be damaged and the cartridges cannot
be used.
• During printing
• For several seconds after inserting the ink cartridge
To Next Page
Loading...
Need help?
General