Before using VJ-1324 OPERATION MANUAL
54 3.3 Installing ink cartridges
10. Shake the high capacity pack adapter gently two to three times and insert it to the slot.
NOTE
•Do not insert the high capacity pack adapter into the ink cartridge slot without a cleaning fluid pack
attached.
The information of the remaining amount will be overwritten and the cleaning fluid pack will not
be usable.
• Insert the high capacity pack adapter all the way to the end of the slot.
• When a high capacity pack adapter is installed, "Ink Refill **%" is displayed on the operation
panel and ink replenishment starts.
• Initial filling takes about eight minutes.
Ink filling operation and pause operation are repeated during the ink replenishment.
• When "100%" is displayed, the ink replenishment is complete.
No. Name
1 High capacity pack adapter
2 Ink cartridge slot K
3 Ink cartridge slot C
4 Ink cartridge slot M
5 Ink cartridge slot Y
1
5
4
3
2
To Next Page
Loading...
Need help?
General