10 - 2
Flywheel and Flywheel Housing
9.612.0.006.7160 - 05/04
Disassembly Notes
Before removing flywheel, lock the engine crankshaft
with the special tool MWM nr. 9.610.0.690.026.4.
The engine could also be locked with a lever positioned
on the nut of the water pump gear, until that it touches
the pulley. This way crankshaft stays locked.
To remove the gear ring (1) from the flywheel (2),
quickly heat it and carefully hit it.
To Next Page
Loading...
