Operation and Maintenance
3 - 5
9.612.0.006.7160 - 06/04
Cooling Fluid and Coolant
Oil Level Check
Attention
• Do not open the expansion reservoir cap while the engine is hot.
• Check the level when the engine is cold.
• Check the level of the cooling system daily. If the level is not correct, add clean water +
MWM coolant according to the proportion recommended on the bottle.
• Carefully open the first stage of the cap relieving the vapour pressure.
• Check for leaks through cooling piping.
• Check the nominal pressure of the cap in case of change.
Water Pump Check
Check for leaks through the pump drain hole.