Nace CP 1 - Glossary of Terms

CP 1 – Cathodic Protection Tester Course Manual
© NACE International, 2000
02/01/05
Isolating Joint Shorts......................................................................................................... 9:6
Cathodic Protection Levels......................................................................... 9:7
Groundbed Malfunctions............................................................................ 9:8
Galvanic and Impressed Current Groundbeds................................................................... 9:8
Rectifiers..................................................................................................... 9:9
Routine Maintenance......................................................................................................... 9:9
Output Problems..............................................................................................................9:10
Section 10
Appendices
Glossary of Terms
Ansuini, Frank J., James R. Dimond, “Factors Affecting the Accuracy of Reference
Electrodes”, MP, 33, 11 (1994): pp. 14-17.
RP0169 “Control of External Corrosion on Underground or Submerged
Metallic Piping Systems”
RP0285 “Corrosion Control of Underground Storage Tank Systems by
Cathodic Protection”
RP0176 “Corrosion Control of Steel Fixed Offshore Platforms Associated
with Petroleum Production”
RP0388 “Impressed Current Cathodic Protection of Internal Submerged
Surfaces of Steel Water Storage Tanks”
RP0177 “Mitigation of Alternating Current and Lightning Effects on Metallic Structures
and Corrosion Control Systems”
RP0575 “Internal Cathodic Protection Systems in Oil Treating Vessels”
RP0193 “External Cathodic Protection of On-Grade Metallic Storage Tank Bottoms”
RP0196 “Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel
Water Storage Tanks”
RP0290 “Cathodic Protection of Reinforcing Steel in Atmospherically Exposed
Structures”