Nace CP 1 - Page 279

RP0169-2002
8 NACE International
TABLE 1
Generic External Coating Systems with Material Requirements
and Recommended Practices for Application
(A)
Generic External Coating System Reference
Coal Tar ANSI
(B)
/AWWA
(C)
C 203
10
Wax NACE Standard RP0375
11
Prefabricated Films NACE Standard MR0274
12
ANSI/AWWA C 214
13
ANSI/AWWA C 209
14
Fusion-Bonded Epoxy Coatings Peabody’s Control of Pipeline Corrosion
15
ANSI/AWWA C 213
16
API
(D)
RP 5L7
17
CSA
(E)
Z245.20M
18
NACE Standard RP0190
19
Polyolefin Coatings NACE Standard RP0185
20
DIN
(F)
30 670
21
ANSI/AWWA C215
22
(A)
NOTE: Many other references are available and this table is not comprehensive. Listing does not constitute
endorsement of any external coating system in preference to another. Omission of a system may be due to unavailability
of reference standards or lack of data.
(B)
American National Standards Institute (ANSI), 1819 L Street, NW, Washington, DC 20036.
(C)
American Water Works Association (AWWA), 6666 West Quincy Ave., Denver, CO 80235.
(D)
American Petroleum Institute (API), 1220 L St. NW, Washington, DC 20005.
(E)
CSA International, 178 Rexdale Blvd., Toronto, Ontario, Canada M9W 1R3.
(F)
Deutsches Institut fur Normung (DIN), Burggrafenstrasse 6, D-10787 Berlin, Germany.
TABLE 2
References for General Use in the Installation and Inspection of External Coating Systems
for Underground Piping
Subject Reference
Application of Organic Pipeline Coatings ANSI/AWWA C 203
10
NACE Standard RP0375
11
Peabody’s Control of Pipeline Corrosion
15
ANSI/AWWA C 213
16
API RP 5L7
17
CSA Z245.20M
18
NACE Standard RP0190
19
Film Thickness of Pipeline Coatings ASTM
(A)
G 128
23
Inspection of Pipeline Coatings NACE Standard RP0274
24
(A)
ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.