TM0101-2001
20 NACE International
Ewing, S.P. “Potential Measurements for Determining
Cathodic Protection Requirements.” Corrosion 7,
12 (1951): pp. 410-418.
Gummow, R.A. “Cathodic Protection Potential Criterion for
Underground Steel Structures.” MP 32, 11 (1993):
pp. 21-30.
Gummow, R.A., Ed. Cathodic Protection Criteria – a
Literature Survey. Houston, TX: NACE, 1989.
Jones, D.A. “Analysis of Cathodic Protection Criteria.”
Corrosion 28, 11 (1972): pp. 421-423.
NACE Publication 2C154. “Some Observations on
Cathodic Protection Potential Criteria in Localized
Pitting.” Houston, TX: NACE, 1954.
NACE Publication 2C157. “Some Observations on
Cathodic Protection Criteria.” Houston, TX:
NACE, 1957.
NACE/CEA Report. “Cathodic Protection Monitoring for
Buried Pipelines.” Houston, TX: NACE, 1990.
Peabody, A.W. Control of Pipeline Corrosion. Houston,
TX: NACE, 2001.
Parker, M.E. Pipeline Corrosion and Cathodic Protection.
2nd ed. Houston, TX: Gulf Publishing, 1962.
Stephens, R.W. Surface Potential Survey Procedure and
Interpretation of Data – Proceedings of the
Appalachian Corrosion Short Course, held May
1980. Morgantown, WV: University of West
Virginia, 1980.
West, L.H. Fundamental Field Practices Associated with
Electrical Measurements – Proceedings of the
Appalachian Corrosion Short Course, held May
1980. Morgantown, WV: University of West
Virginia, 1980.
To Next Page
Loading...